MANUAL AND AUTOMATIC MEDICAL GAS CENTRAL INSTALLATION This oxygen center is also equipped to meet the needs of liquid oxygen. The center is presented according to the needs of the Hospital so that the central area of the medical gas installation is safe. To meet these needs, we provide several quality products, both domestically produced and imported, with guaranteed warranties and reliable spare parts. Our Medical Gas and Vacuum Installation Centers offer several types and functions, including Oxygen, Nitrous Oxide (N2O), Carbon Dioxide (CO2), and Nitrogen (N2).
MEDICAL GAS CENTRAL INSTALLATION STANDARDS
-
Manual Gas Manifold Center
CENTRAL MEDICAL GAS INSTALLATION Manual Gas Manifold, provides a constant gas supply from all cylinders in the central unit, both on the right and left sides. It is very suitable for hospitals with oxygen usage below 100 cylinders per month. It is very efficient and safe in operation. The pressure gauge clearly displays the gas source and the total pressure distributed to the pipes and outlets. There is a safety valve that will automatically open if the pressure is too high. 100% passed pressure tests. Available for O2, Air, N2O, N2, CO2
-
Central Digital Automatic Manifold
The Digital Automatic Manifold system is built to high standards and quality and functions automatically to transfer empty pressure from used oxygen, nitrous oxide, carbon dioxide, nitrogen, and other cylinders to full cylinders (standby) to ensure adequate medical gas flow. Maintained without having to wait for manual replacement by experts.
CENTRAL MEDICAL GAS INSTALLATION This manifold has a signal or indicator that can indicate the status of the manifold if the pressure in the first (primary) or second (secondary) header is lower than indicated (empty bottle). It can provide visual information if one of the gas sources is depleted. It also has a DIGITAL indicator and can be connected and monitored with a computer monitor system (as an optional system). Using components that have been tested for their capabilities, it is highly suitable for use by the INDONESIAN NATION. It has an output pressure of 4-7 bar and can flow up to 350m3/h (5800LPM), capable of serving more than 1,000 beds, a first in INDONESIA and for INDONESIA.
